BPI-R2 hardware spec
Hardware | Specification of Banana pi BPI-R2 |
Soc | MediaTek MT7623N, Quad-code ARM Cortex-A7 |
GPU | Mali 450 MP4 |
SDRAM | 2GB DDR3 (shared with GPU) |
Power | 12V @ 2A via DC power |
Features | |
Low-level peripherals | 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. |
On board Network | 5x 10/100/1000Mbps Ethernet (MT7530) |
Wifi | Wifi 802.11 a/b/g/n 2.4GHz/ 5GHz(MT6625L) |
Bluetooth | BT4.1 BLE with MTK6625L chip |
On board Storage | MicroSD (TF) card, 2 SATA 6Gbps ,eMMC |
Display | HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200; MIPI Display Serial Interface (DSI) interface(4 data lanes) |
Video decoder | Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile 1080p@60fps, HEVC/H.265 1080P@60fps |
Video encoder | VP8 encoder: 1080p@30fps H.264 encoder: high profile 1080p@30fps |
Audio outputs | HDMI, I2S audio |
PCIE | 1 pcie interface & 1 pcie pin define interface |
USB 3.0 | 2x USB 3.0 host |
USB 2.0 | 1x USB 2.0 OTG |
Buttons | Reset button, Power button, U-boot button |
Leds | Red, Green, Blue |
Other | IR reciever |
Sizes | 148 mm × 100.5mm |
Weight | 100g |
Last updated