BPI-R2 MIPI DSI interface

MIPI DSI (Display Serial Interface)：

The display Connector is a 40-pin FPC connector which can connect external LCD panel (MIPI DSI) and touch screen (I2C) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as “DSI”.

DSI Pin Name	Default Function	Function2：GPIO
CN6-P01	VCC-3V3
CN6-P02	VCC-5V
CN6-P03	VCC-3V3
CN6-P04	VCC-5V
CN6-P05	GND
CN6-P06	VCC-5V
CN6-P07	GND
CN6-P08	VCC-5V
CN6-P09	NC
CN6-P10	GND
CN6-P11	NC
CN6-P12	DSI-D0N
CN6-P13	NC
CN6-P14	DSI-D0P
CN6-P15	DSI_TE	GPIO84
CN6-P16	GND
CN6-P17	I2C_SDA2	GPIO77
CN6-P18	DSI-D1N
CN6-P19	I2C_SCL2	GPIO78
CN6-P20	DSI-D1P
CN6-P21	CTP-INT	GPIO23
CN6-P22	GND
CN6-P23	CTP-RST	GPIO236
CN6-P24	DSI-CKN
CN6-P25	GND
CN6-P26	DSI-CKP
CN6-P27	LCM_BLCTRL	GPIO205
CN6-P28	GND
CN6-P29	LCM_RST	GPIO83
CN6-P30	DSI-D2N
CN6-P31	LCM_BIAS_EN	GPIO204
CN6-P32	DSI-D2P
CN6-P33	GND
CN6-P34	GND
CN6-P35	LCM_BLPWM	GPIO203
CN6-P36	DSI-D3N
CN6-P37	GND
CN6-P38	DSI-D3P
CN6-P39	NC
CN6-P40	GND

BPI-R2 LCD touch panel accessories

https://bananapi.gitbooks.io/bpi-accessories/content/bpi70lcdtouchpanel.html

• note:the touch panel accessories support RGB interface and MIPI interface ,when you use BPI-M3, please choose MIPI interface.