banana pi BPI-R2 open source smart router
  • About banana pi BPI-R2
  • BPI-R2 hardware
    • BPI-R2 hardware interface
    • BPI-R2 hardware spec
    • BPI-R2 GPIO Pin define
    • BPI-R2 SATA interface
    • BPI-R2 micro SD card slot
    • BPI-R2 5 GigE port
    • BPI-R2 eMMC flash
    • BPI-R2 WIFI interface
    • BPI-R2 wifi antenna slot
    • BPI-R2 bluetooth interface
    • BPI-R2 MIPI DSI interface
    • BPI-R2 HDMI interface
    • BPI-R2 USB 3.0 interface
    • BPI-R2 Uart interface
    • BPI-R2 PCIE interface
    • BPI-R2 OTG interface
    • BPI-R2 Power interface
    • BPI-R2 schematic diagram
    • BPI-R2 DXF and 3D design
  • BPI-R2 software
    • BPI-R2 quick start
    • Linux image,kernel 4.4
    • Android image
    • OpenWRT/LEDE
    • BPI-7615(based on MT7615)
  • BPI-R2 source code on github
    • BPI-R2 BSP source code
    • OpenWRT source code
    • BPI-R2 LEDE source code for hardware NAT
    • Frank`s github for BPI-R2
  • Reference documents
    • FW-Web Wiki
  • BPI-R1 BPI-R2 board Comparison
  • BPI-R2 quality guarantee
  • All banana pi product
  • BPI 4.0 customized Server
  • Getting Started with R2 - Banana Pi Wiki
  • en:bpi-r2:start [FW-WEB -Wiki]
Powered by GitBook
On this page

Was this helpful?

  1. BPI-R2 hardware

BPI-R2 Power interface

PreviousBPI-R2 OTG interfaceNextBPI-R2 schematic diagram

Last updated 5 years ago

Was this helpful?

BPI-R2 power with DC port (default)

please note: must use 12V/2A adatper.