# BPI-R64 Introduction

The Banana Pi R64 is a router based development board, which can run on a variety of open source operating systems including OpenWrt,Linux. It has 4 Gigabit LAN ports, 1 Gigabit WAN, and AC wifi AP function. use 64 bit chip designKey Features

![Banana Pi BPI-R64 Open source smart router](/files/-MeUCoGdy_Y4kd5xBhA4)

* MediaTek MT7622,1.35GHZ 64 bit dual-core ARM Cortex-A53
* 1G DDR3 SDRAM
* Mini PCIE interface support 4G module
* built-in 4x4n 802.11n/Bluetooth 5.0 system-on-chip
* MTK7615 4x4ac wifi (option)
* support 1 SATA interface
* MicroSD slot supports up to 256GB expansion
* 8G eMMC flash (option 16/32/64G)
* 5 port 10/100/1000 Mb Ethernet port
* (1) USB 3.0
* Slow I/O:ADC, Audio Amplifier, GPIO, I2C, I2S, IR, PMIC I/F, PWM, RTC, SPI, UART
* POE function support

wiki page:

<http://wiki.banana-pi.org/Banana_Pi_BPI-R64>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://bananapi.gitbook.io/banana-pi-bpi-r64-open-source-router-board/master.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.