banana pi BPI-G1 open source IoT development board
  • Initial page
  • LANGS
  • About BPI-G1 IoT development board
    • BPI-G1 hardware
    • Summary
    • BPI-G1 Other Accessories
    • Which IDE development can use
    • Quick start of TI CC2530
    • Quick Start STM32F103CB
    • BPI-G1 Simple Code Firmware programming manual
    • Quick start of TI CC3200
    • BPI-G1 smart home gateway project
    • Which emulator debugging
    • BPI-G1 Global Power and Ground
    • BPI-G1 Hardware Specifications
    • Some of the features TI CC2540/1
    • Status LEDs for each module
    • BPI-G1 Main features
    • BPI-G1 Quick Start
    • Explanation
    • Some of the features TI CC2530
    • Some of the features TI CC3200
    • Some of the features STM32F103CB
    • TI CC3200 part Peripheral Interface
    • TI CC2530 part Peripheral Interface
    • Button
    • STM32F103CB part Peripheral Interface
    • CC2530 connection with F103
    • CC2540 connection with F103
    • BPI Open debugger burn board
    • TI CC3200 mode selection jumper
    • TI CC2540/1 part Peripheral Interface
    • BPI-G1 Module interconnection
    • BPI-G1 hardware interface
    • BPI-G1 Accessories
    • Quick start of TI CC2540/1
  • About BPI-G1 IoT development board
    • BPI-G1 Global Power and Ground
    • BPI-G1 Schematic
    • Summary
    • BPI-G1 Other Accessories
    • Quick Start STM32F103CB
    • BPI-G1 smart home gateway project
    • CC2530 connection with F103
    • Button
    • BPI Open debugger burn board
    • BPI-G1 Hardware Specifications
    • CC2540 connection with F103
    • All banana pi product
    • bpi40customizedserver
    • BPI-G1 Main features
    • BPI-G1 Quick Start
    • Explanation
    • BPI-G1 hardware interface
    • BPI-G1 Accessories
    • Quick start of TI CC2540/1
    • BPI-G1 hardware
    • BPI-G1 Module interconnection
    • Quick start of TI CC2530
    • Quick start of TI CC3200
    • BPI-G1 Simple Code Firmware programming manual
Powered by GitBook
On this page

Was this helpful?

About BPI-G1 IoT development board

PreviousLANGSNextBPI-G1 hardware

Last updated 5 years ago

Was this helpful?

BPI-G1 is an integrated IEEE802.11 b / g / n (WIFI wireless network), IEEE802.15.4 (Zigbee), IEEE 802.11-2007 Standard (Bluetooth Low Energy4.0) development board. It is very easy to put these wireless protocol seamlessly together, you can exchange any different transport protocols, and three kinds of wireless protocols are integrated by three single-chip SOC, you can easily create your own Internet of things (IoT). WIFI part of which is the use of TI's CC3200, which is a high-performance ARM® Cortex®-M4 wireless SOC, internally integrated TCP / IP protocol stack, simply use the BSD Socket can connect to the Internet. The Zigbee is used TI CC2530, which integrates wireless capabilities and enhanced 8051 core SOC, TI after years of improvement, it is already quite mature and stable, TI's Z-stack has achieved Zigbee 2007 / Pro, you can use the 16's short address, you can use the 64-bit long address communication, face large local interconnect systems, advanced security encryption and mesh network structure can easily cope. Bluetooth 4.0 (BLE) using TI CC2540 / 1, an integrated BLE stack and enhanced 8051 core, low-power wireless SOC, at present, most mobile phones have support for Bluetooth 4.0, both as a wearable device, or mobile interactive Accessories, CC2540 can be easily completed. Meanwhile BPI G1 also incorporates a high-performance STM32 ARM® Cortex®-M3 microcontroller, which will help you deal with time-consuming data or transit, the three wireless SOC coordinated. Therefore, the use of BPI G1 can help you quickly achieve a variety of things DIY design.

What can I do with BPI-G1?

  1. Smart Home.

  2. Intelligent Gateway

  3. DIY electronic control