banana pi BPI-G1 open source IoT development board
  • Initial page
  • LANGS
  • About BPI-G1 IoT development board
    • BPI-G1 hardware
    • Summary
    • BPI-G1 Other Accessories
    • Which IDE development can use
    • Quick start of TI CC2530
    • Quick Start STM32F103CB
    • BPI-G1 Simple Code Firmware programming manual
    • Quick start of TI CC3200
    • BPI-G1 smart home gateway project
    • Which emulator debugging
    • BPI-G1 Global Power and Ground
    • BPI-G1 Hardware Specifications
    • Some of the features TI CC2540/1
    • Status LEDs for each module
    • BPI-G1 Main features
    • BPI-G1 Quick Start
    • Explanation
    • Some of the features TI CC2530
    • Some of the features TI CC3200
    • Some of the features STM32F103CB
    • TI CC3200 part Peripheral Interface
    • TI CC2530 part Peripheral Interface
    • Button
    • STM32F103CB part Peripheral Interface
    • CC2530 connection with F103
    • CC2540 connection with F103
    • BPI Open debugger burn board
    • TI CC3200 mode selection jumper
    • TI CC2540/1 part Peripheral Interface
    • BPI-G1 Module interconnection
    • BPI-G1 hardware interface
    • BPI-G1 Accessories
    • Quick start of TI CC2540/1
  • About BPI-G1 IoT development board
    • BPI-G1 Global Power and Ground
    • BPI-G1 Schematic
    • Summary
    • BPI-G1 Other Accessories
    • Quick Start STM32F103CB
    • BPI-G1 smart home gateway project
    • CC2530 connection with F103
    • Button
    • BPI Open debugger burn board
    • BPI-G1 Hardware Specifications
    • CC2540 connection with F103
    • All banana pi product
    • bpi40customizedserver
    • BPI-G1 Main features
    • BPI-G1 Quick Start
    • Explanation
    • BPI-G1 hardware interface
    • BPI-G1 Accessories
    • Quick start of TI CC2540/1
    • BPI-G1 hardware
    • BPI-G1 Module interconnection
    • Quick start of TI CC2530
    • Quick start of TI CC3200
    • BPI-G1 Simple Code Firmware programming manual
Powered by GitBook
On this page

Was this helpful?

  1. About BPI-G1 IoT development board

BPI-G1 Module interconnection

PreviousTI CC2540/1 part Peripheral InterfaceNextBPI-G1 hardware interface

Last updated 5 years ago

Was this helpful?

WIFI (CC3200), BLE (CC2540 / 1) and ZIGBEE (CC2530) are interconnected through STM32F103CB serial port, they can work alone, can also coordinate the work will be given below communication connections between the modules schematic。5.1 CC3200 connection with F103