Introduction
Last updated
Was this helpful?
Last updated
Was this helpful?
Banana Pi BPI-F2S is the first board withBanana Pi team and , this is a industrial-grade board. use Plus1(sp7021) design. this is a industrial-grade board.
==Hardware spec==
*SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM.
*Storage – 8GB eMMC flash, microSD card slot
*Video Output – HDMI 1.4 output
*Camera I/F – MIPI CSI connector
*Connectivity – 2x 10/100M Ethernet
*USB – 2x USB 2.0 host ports, 1x micro USB port
*Expansion
::40-pin GPIO header compatible with Raspberry Pi header
::2x 50-pin FPGA interface for Trenz Electronic TE0725LP-01-100-2D Artix 7 FPGA board
::Unpopulated, undocumented 50-pin header that’s appears to be routed to one of the headers for the optional FPGA board
*Debugging – 3-pin header for UART console, 10-pin JTAG header, SWD ICE port
*Security – TPM 2.0 via ST33TPH2EI2C secure element
*Misc – Power switch, reset button, boot selection dip switch
*Power Supply – 12VDC via power barrel jack
*Dimensions – Still not documented
*Temperature Range – -40C ~ +85°C (at least true for the processor, but not specified for the board itself).
with Xilinx Artix-7 FPGA extend board for IC deisgn and FPGA
wiki page:
