banana pi BPI-M2 A31s quad core single board compu
  • Initial page
  • LANGS
  • Banana pi BPI-M2
    • BPI-M2 hardware interface:
    • Summary
    • Armbian linux for BPI-M2
    • BPI-M2 source code on github
    • BPI-M2 WiringPi
    • BPI-M2 3.7V lithium battery interface
    • How to setup docker env. to build github source code
    • A31 Manual build howto
    • BPI-M2 GigE LAN
    • All Banana Pi SBC Comparison
    • OpenSuse for BPI-M2
    • BPI-M2 software
    • BPI-M2 Camera interface
    • BPI-M2 Building a Minimal linux System
    • BPI-M2 schematic diagram
    • Bananian linux
    • BPI-M2 IR interface
    • NetBSD/evbarm on Allwinner Technology SoCs
    • Android software
    • BPI-M2 wifi antenna slot
    • BPI-M2 RGB DSI interface
    • BPI-M2 quick start
    • BPI-M2 CE FCC RoHS Certification
    • BPI-M2 linux-sunxi wiki
    • BPI-M2 DXF and 3D design
    • linuxkernel33
    • BPI-M2 OTG interface
    • mainline kernel
    • OpenWRT
    • BPI-M2 GPIO Pin define
    • Reference documents for BPI-M2
    • Allwinner chip documents
    • How to building a Minimal system for BPI-M2
    • BPI-M2 USB interface
    • BPI-M2 WIFI interface
    • BPI-M2 DC Power interface
    • BPI-M2 micro SD card slot
    • How to build Android 4.4.2 Image for BPI-M2
    • ABD driver
    • Linux mainlining effort
    • BPI-M2 HDMI interface
    • BPI-M2 hardware spec:
    • uboot
  • Banana pi BPI-M2
    • ABD driver
    • All Banana Pi SBC Comparison
    • BPI-M2 hardware spec:
    • Summary
    • BPI-M2 schematic and gerber file
    • A31 Manual build howto
    • bpi-m2-hardware
    • BPI-M2 CE FCC RoHS Certification
    • All banana pi product
    • BPI-M2 DXF and 3D design
    • Bananian linux
    • BPI-M2 GPIO Pin define
    • Allwinner chip documents
    • Android software
    • Armbian linux for BPI-M2
    • BPI-M2 3.7V lithium battery interface
Powered by GitBook
On this page

Was this helpful?

  1. Banana pi BPI-M2

A31 Manual build howto

PreviousBPI-M2 schematic and gerber fileNextbpi-m2-hardware

Last updated 5 years ago

Was this helpful?

This is currently a placeholder for an A31 specific rework of the Manual build howto.

This page describes the process to combine Allwinners binary boot0, an SDK U-Boot, an SDK linux kernel and other bits together to create a useful SD-card from scratch, the basis for further hacking.

This page is only suited for A31 and A31s based devices, please look under See also for other manual build howtos.

We of course do not build a whole distribution, we only build U-Boot, the kernel and a handful of tools, and then use an existing rootfs to get a useful system. Depending on the rootfs size, you might want to use a 2GB or larger SD Card. SD-card partitioning and formatting will be taken care of later.

link:

http://linux-sunxi.org/A31_Manual_build_howto