banana pi BPI-D1 open source IP camera
  • Initial page
  • LANGS
  • Banana pi BPI-D1 open source IP camera project.
    • View Real-time Video
    • BPI-D1 Power Supply
    • Summary
    • How to connect to the AP
    • How to record a video
    • How to set
    • BPI-D1 hardware interface
    • BPI-D1 GPIO Pin define
    • BPI-D1 hardware spec
    • All banana pi product
    • bpi40customizedserver
    • Program the Firmware
    • How to view files
    • BPI-D1 source code on github
    • First Chapter
    • Relevant Information
    • BPI-D1 schematic diagram
    • AK3918 Specification
  • Banana pi BPI-D1 open source IP camera project.
    • First Chapter
    • How to connect to the AP
    • Summary
    • How to record a video
    • BPI-D1 hardware interface
    • How to set
    • BPI-D1 GPIO Pin define
    • BPI-D1 hardware spec
    • BPI-D1 source code on github
    • Relevant Information
    • BPI-D1 schematic diagram
    • AK3918 Specification
    • View Real-time Video
    • Program the Firmware
    • BPI-D1 Power Supply
    • How to view files
Powered by GitBook
On this page

Was this helpful?

  1. Banana pi BPI-D1 open source IP camera project.

View Real-time Video

PreviousAK3918 SpecificationNextProgram the Firmware

Last updated 5 years ago

Was this helpful?

View in range of LAN

At present, viewing real-time video can be achieved in the LAN through VLC player or MX Player. If the two players installed on your PCs or mobile devices, it could be view via network stream. To do this:

note: Just take the case of VLC player.

  1. Install VLC player on your PCs or mobile devices.

  2. Connect any mobile devices (e.g. Smartphone, tablet or computer) to the WiFi connection “SSID= XXX_D1_A39XXX” and enter the default password “12345678”.

  3. Open VLC player and click “ ”and open network stream.

  4. Enter the AP of BPI-D1“rtsp://192.168.0.1”, click “open” and view the real-time video.

[Reminder]: Real-time video may be delay, which related to the network transmission.