BPI-M1 IR interface

BPI-M1 support IR interface on board. you can use it as remote control.

How to use IR interface

test on bananian image:

1,install lirc

apt-get install lirc 
apt-get install evtest

2,edit /etc/lirc/hardware.conf as below:

nano /etc/lirc/hardware.conf

# /etc/lirc/hardware.conf
# Arguments which will be used when launching lircd
#Don't start lircmd even if there seems to be a good config file

#Don't start irexec, even if a good config file seems to exist.

#Try to load appropriate kernel modules

# Run "lircd --driver=help" for a list of supported drivers.
# usually /dev/lirc0 is the correct setting for systems using udev

ctrl+O save and ctrl+x exit.

3,test lirc

service lirc start

4 test remote-control unit


choose "0" must xunxi-ir

please note:value 0 value 1

press is:1,unpress is:0

Last updated